Heating clamps Kamush HC60/HC75

Heating clamp

Heating clamp

Heating clamps Kamush HC60/HC75

Laboratory clamp equipped with an aluminum heating block. Enables thermostating or heating laboratory vessels. Excellent for use in temperature-assisted solid phase peptide synthesis. Classic Merrifield vessels or Kamysz vessels can be used. The clamps are controlled via the Kamush mini or Kamush mini 2 controller (with timer). It is recommended to use the clamps on a bar shaker, eg Kamush model (Laboratory shaker with rods LP015RSk).

Excellent temperature stability! Heats to 75°C in less than 3 minutes.

Clamps are available with an aluminum block for vessels/test tubes of 16,22 or 28 mm diameter.

Specification:

  • Temperature Range: Ambient to 60°C (HC60) or 75°C (HC75)
  • Temperature Display Resolution: 0.1°C
  • Temperature Uniformity: ± 0.2°C
  • Temperature Accuracy:± 0.2°C
  • Temperature Controller: Microprocessor
  • User Timer (only for Kamush mini 2 controller - option): 1 to 99 hours
  • Control: PI Microprocessor controller (Kamush mini/Kamush mini 2)
  • Dimensions:
    the length of the heating block 16 – 50mm, 22 - 50mm, 28 -50mm (other dimensions on request)
    surface area of the heating element (aluminum block) – 16 - 24cm2 , 22 - 34cm2 , 28 - 53cm2
  • Weight of clamp (without controler): -
  • Electrical: 100-230V (power supply 24V), 50/60 Hz, 1A
  • Heater power: 40W
Model Description
HC60.16 clamp for 60°C, diameter 16 mm
HC60.22 clamp for 60°C, diameter 22 mm
HC60.28 clamp for 60°C, diameter 28 mm
HC75.16 clamp for 75°C, diameter 16 mm
HC75.22 clamp for 75°C, diameter 22 mm
HC75.28 clamp for 75°C, diameter 28 mm

 

Kamush controllers (mini, mini 2 - with timer):

Laboratory temperature controller 24V

borosilicate glass

Kamush® Glass Blowing Laboratory

Construction, modification, repairing and custom design of borosilicate glass


DetailsRealizations

Worldwide delivery

We can deliver orders to almost every country. Contact us to confirm the delivery time.

Contact now