Caps and adaptors
Adapters for stirrers (for rod 8 mm)
GL45
GLS80
29/32
Adapters for reactors (polypropylene)
GL45
GLS80
GLS80
Caps with joint 29/32 (PTFE) / Nuts and ferrules
GL45
GLS80
1/16" / 1/8”
Caps for LC columns (with ¼ - 28” thread connection)
GL18 / GL25
GL32
GL45
| Cat. | Adapter type |
|---|---|
| ADA001 | GL45, 8 mm inlet GL18 PTFE thread * |
| ADA002 | GLS80, 8 mm inlet GL18 PTFE thread * |
| ADA003 | 29/32 PTFE joint, 8 mm inlet, GL18 thread * |
| ADA004 | GL45, 8 mm inlet GL18, side 2 x GL14 (loop 6,4 mm) ** |
| ADA005 | GLS80, inlet joint 29/32, 3 x 14/23 joint |
| ADA006 | GLS80, 8 mm inlet GL18 (central hole) **, 2 x GL14 (loop 6,4 mm) +1 x GL18 (loop 10 mm) |
| ADA007 | GL45 with PTFE hole for 29/32 joint |
| ADA008 | GLS80 with PTFE hole for 29/32 joint |
| NUF016 | Nut/ferrule for 1/16” tube (1/4 – 28” threated nut) |
| NUF008 | Nut/ferrule for 1/8” tube (1/4 – 28” threated nut) |
| CLC018 | Cap with GL18 and ¼” – 28 thread (PTFE) |
| CLC025 | Cap with GL25 and ¼” – 28 thread (PTFE) |
| CLC032 | Cap with GL32 and ¼” – 28 thread (PTFE) |
| CLC045 | Cap with GL45 and ¼” – 28 thread (PTFE) |
* Adapters equiped with screw with hole (GL18) and PTFE coated o-rings inside.
** A cap with a hole and an o-ring in teflon are needed for stirring purposes.
If you need other teflon (PTFE), poliacetale (POM) or polypropylene (PP) adapters, please contact us.
Caps for columns, vessels and reactors
