Heating clamps Kamush HC60/HC75

Heating clamp

Heating clamps Kamush HC60/HC75

Laboratory clamp equipped with an aluminum heating block. Enables thermostating or heating laboratory vessels. Excellent for use in temperature-assisted solid phase peptide synthesis. Classic Merrifield vessels or Kamysz vessels can be used. The clamps are controlled via the Kamush mini or Kamush mini 2 controller (with timer). It is recommended to use the clamps on a bar shaker, eg Kamush model (Laboratory shaker with rods LP015RSk).

Excellent temperature stability! Heats to 75°C in less than 3 minutes.

Clamps are available with an aluminum block for vessels/test tubes of 16,22 or 28 mm diameter.

Specification:

  • Temperature Range: Ambient to 60°C (HC60) or 75°C (HC75)
  • Temperature Display Resolution: 0.1°C
  • Temperature Uniformity: ± 0.2°C
  • Temperature Accuracy:± 0.2°C
  • Temperature Controller: Microprocessor
  • User Timer (only for Kamush mini 2 controller - option): 1 to 99 hours
  • Control: PI Microprocessor controller (Kamush mini/Kamush mini 2)
  • Dimensions:
    the length of the heating block 16 – 50mm, 22 - 50mm, 28 -50mm (other dimensions on request)
    surface area of the heating element (aluminum block) – 16 - 24cm2 , 22 - 34cm2 , 28 - 53cm2
  • Weight of clamp (without controler): -
  • Electrical: 100-230V (power supply 24V), 50/60 Hz, 1A
  • Heater power: 40W
Model Description
HC60.16 clamp for 60°C, diameter 16 mm
HC60.22 clamp for 60°C, diameter 22 mm
HC60.28 clamp for 60°C, diameter 28 mm
HC75.16 clamp for 75°C, diameter 16 mm
HC75.22 clamp for 75°C, diameter 22 mm
HC75.28 clamp for 75°C, diameter 28 mm

Worldwide delivery

We can deliver orders to almost every country. Contact us to confirm the delivery time.

Contact now

Publish modules to the "offcanvs" position.